Civil Engineering
A $25.00 per semester student computing facility user fee is assessed for CSEM engineering courses. This fee is in addition to any lab/material fees.
CE 112 3 Credits
Elementary Surveying
Basic plane surveying; use of transit, level, theodolite and total
station. Traverses, public land system, circular curves, cross-sectioning
and earthwork. Course fee: $50. (Prerequisite: MATH 108.) (2 + 3)
Offered Spring
CE 326W 4 Credits
Introduction to Geotechnical Engineering
Fundamentals of geotechnical engineering including soil mechanics
and foundation engineering. Identification and classification of soil,
physical and mechanical properties of soil, subsurface exploration
and laboratory testing techniques, seepage, compaction, bearing capacity,
slope stability, deep and shallow foundation design, retaining structure
design, frozen ground consideration. Course fee: $50. (Prerequisites:
ES 331, 341, CE 334, ENGL 111X, or permission of instructor.) (3 + 3)
Offered Spring
CE 334 3 Credits
Properties of Materials
Properties of engineering materials. Bonding, crystal and amorphous
structures. Relationships between microstructure and engineering properties.
Modification of properties and environmental serviceability. Concrete
and asphalt mixes. Course fee: $50. (Co-requisite: ES 331.) (2 + 3)
Offered Fall
CE 344 3 Credits
Water Resources Engineering
Fundamentals of engineering hydrology and hydraulic engineering.
Precipitation, runoff, statistical methods, flood control, open channels
and groundwater. Course fee: $50. (Prerequisite: ES 341.) (3 + 0)
Offered Fall
CE 400 0 Credits
FE Exam
Complete the FE application and take the state of Alaska Engineering-in-Training
Exam in the same semester of course enrollment. (Prerequisite: Senior
standing in civil engineering.) Offered Fall, Spring
CE 402 3 Credits
Introduction to Transportation Engineering
Transportation systems, planning, design parameters, demand and
mode specific consideration. (Prerequisite: CE junior standing or permission
of instructor.) (3 + 0) Offered Fall
CE 403 3 Credits
Traffic Engineering
Analysis and design of highways, streets and intersections for
traffic consideration. (Prerequisite: CE 402.) (2 + 3) Offered
Fall
CE 404 3 Credits
Highway Engineering
Engineering considerations for highway design including vertical
and horizontal alignment, cross sections, drainage, pavements, earthworks,
signs and markings, intersection and interchange. (Prerequisite: CE
402.) (2 + 3) Offered Spring
CE 415 3 Credits
Advanced Surveying
Azimuth by astronomic methods. Route surveying, including horizontal
and vertical curves, spirals, cross-sectioning, and earthwork. Reduction
of electronic distance measurements. Alaska State Plane Coordinate
System, both old (NAD27) and new (NAD83). Course fee: $50. (Prerequisite:
CE 112.) (2 + 3) Offered Fall
CE 416 1 Credit
Boundary Surveying
Surveying problems related to land subdivision with emphasis on
the legal aspects. Metes and bounds descriptions and platted subdivisions.
(Prerequisite: CE 112 or permission of instructor.) (1 + 0)
Offered As Demand Warrants
CE 422 3 Credits
Foundation Engineering
Bearing capacity of soils and effects of settlements on structure.
Design of footings and rafts, pile and pier foundations, retaining
walls and anchored bulkheads. Foundations on frozen soils and construction
problems in foundation engineering. (Prerequisites: CE 326, ES 301.)
(3 + 0) Offered Spring
CE 423 3 Credits
Introduction to Earthquake Engineering
Introduction to sources of earthquakes; source mechanism and source
parameters; attenuation relationships; earthquake response of single
and multi-degree of freedom systems; earthquake response spectra and
earthquake-induced liquefaction and densification of soil. (Prerequisite:
CE 326. Next offered: 2005-06.) (3 + 0) Offered Alternate
Spring
CE 425 3 Credits
Advanced Soil Mechanics
Soil formation, identification and classification, physical and
mechanical properties of soil, seepage, drainage and frost action,
subsoil investigation, bearing capacity of soils, and lateral earth
pressures and stability of slopes. Course fee: $50. (Prerequisites:
CE 326, ES 301.) (2 + 3) Offered As Demand Warrants
CE 431 3 Credits
Structural Engineering I
Analysis of statically determinate and indeterminate structures
to include: beams, trusses and frames. Internal force resultants, shear
and moment diagrams, deflections, internal stresses. Influence lines
and criteria for moving loads. Indeterminate analysis to include methods
of consistent deflections, slope deflection and moment distribution.
Introduction to matrix methods. Course fee: $50. (Prerequisites: CE
334, ES 331.) (2 + 3) Offered Spring
CE 432 3 Credits
Structural Engineering II
Concepts of analysis/design using advanced methods of structural
analysis and computer techniques. Effects of material behavior and
modes of failure (building, bending, shear, connections) on design
decisions examined. Course fee: $50. (Prerequisite: CE 431.) (2 + 3)
Offered Fall
CE 433 3 Credits
Reinforced Concrete Design
Design philosophies and current practice. Short and long columns,
beam-columns, flexural members, to include: rectangular and T-beams,
one and two-way slabs. Footings. Crack control, anchorage, development
lengths and deflections. Introduction to complete structural systems.
Current ACI specifications used. Course fee: $50. (Prerequisite: CE
431.) (2 + 3) Offered Spring
CE 434 3 Credits
Timber Design
Essentials of structural design. Design of basic components of
solid and laminated timber, connections, arches, pole framing, diaphragms,
stressed-skin construction and timber shells. Course fee: $50. (Prerequisites:
ES 331 and CE 431.) (2 + 3) Offered Spring
CE 438W,O 3 Credits
Design of Engineered Systems
System design principles for large-scale constructed facilities.
Application of ethics, liability and legal principles to professional
practice. Emphasis on teamwork and leadership. (Prerequisite: ENGL
111X; ENGL 211X or ENGL 213X or permission of instructor; and COMM
131X or 141X; and last year of civil engineering B.S. program.) (3 + 0)
Offered Spring
CE 441 4 Credits
Environmental Engineering
Fundamentals of environmental engineering including theory and
application of water and wastewater, solid waste and air quality engineering
practice; emphasis on natural processes that influence pollutant fate
and how these processes are used in engineered systems for pollution
control. Course fee: $50. (Prerequisite: ES 341 or permission of instructor.)
(3 + 3) Offered Spring
CE 442 4 Credits
Environmental Engineering II
Advanced topics involving environmental, focusing on design of
pollution control and remediation systems. Presents an understanding
of the theories and principles for the design of engineering systems
for environmental protection, management and control. Includes air
pollution control, water and wastewater treatment, solid waste management,
and hazardous and toxic waste transport, treatment and disposal. Emphasis
on practical application of environmental engineering principles to
real-world problems. Course fee: $50. (Prerequisites: CE 441 and junior
standing in civil engineering.) (3 + 3) Offered Fall
CE 445 3 Credits
Engineering Hydrology
Design and analysis; extended coverage of hydrologic concepts from
CE 344. Precipitation, evaporation analysis; groundwater hydraulics;
runoff analysis and prediction; statistical hydrology; application
of simulation models. (Prerequisite: CE 344.) (2 + 3) Offered
Spring
CE 470 1 Credit
Civil Engineering Internship
Supervised work experience in engineering organizations. Assignments
individually arranged with cooperating organizations and agencies.
(Prerequisites: Senior standing, permission of department coordinator.)
(0 + 3) Offered Fall, Spring
CE 603 3 Credits
Arctic Engineering
Application of engineering fundamentals to problems of advancing
civilization to polar regions. Logistics, foundations on frozen ground
and ice thermal aspects of structures, materials, transport, and communications,
and heating and ventilating. Course fee: $50. (Recommended: Senior
standing or B.S. degree in engineering; or permission of instructor.)
(3 + 0) Offered Fall, Spring
CE 605 3 Credits
Pavement Design
Current design techniques for flexible and rigid pavements. Materials
characterization, loading considerations, empirical design methods,
mechanistic design methods, rehabilitation. (Recommended: Graduate
standing and CE 402 or permission of instructor.) (3 + 0)
Offered Alternate Spring
CE 617 3 Credits
Control Surveys
Geodetic surveying, where the shape of the earth must be considered.
Forward and inverse geodetic problems. Medium to long electronic distance
measurements. Heavy emphasis on Alaska State Plane Coordinate System
(Nad 83) and UTM Coordinate System. Adjustment of level nets. (Prerequisites:
CE 415 or other surveying experience acceptable to instructor.) (3 + 0)
Offered As Demand Warrants
CE 620 3 Credits
Civil Engineering Construction
Construction equipment, methods, planning and scheduling, construction
contracts, management and accounting, construction estimates, costs
and project control. (Recommended: ESM 450 or equivalent.) (3 + 0)
Offered As Demand Warrants
CE 622 3 Credits
Foundations and Retaining Structures
Advanced study of shallow and deep foundations, retaining structures
and buried pipes. (Prerequisites: CE 422 or permission of instructor.)
(3 + 0) Offered As Demand Warrants
CE 625 3 Credits
Soil Stabilization
Soil and site improvement using deep and shallow compaction, additives,
pre-loading, vertical and horizontal drains, electroosmosis and soil
reinforcement. (Prerequisites CE 435 or permission of instructor.)
(3 + 0) Offered Alternate Spring
CE 626 3 Credits
Thermal Geotechnics
Fundamentals of thermal regime of soils and rocks. Thermal impact
of structures on soils. Thawing of permafrost beneath roads, buildings
and around pipelines. Natural and artificial freezing of soils. Engineering
means to maintain thermal regime of soils. Thermal design considerations.
(Prerequisites: CE 326, CE 422 and CE 425 or permission of instructor.)
(3 + 0) Offered As Demand Warrants
CE 627 3 Credits
Earthquake Engineering
Fundamentals of geotechnical earthquake engineering: wave propagation
in soils; dynamic soil properties; influences of soils on ground motion;
determination of soil response under strong seismic motion; causes
of soil failures, soil liquefaction, soil settlement, soil-structure
interaction and slope stability; analysis and design of dams, earth
structures and foundation systems. (3 + 0) Offered As Demand
Warrants
CE 628 3 Credits
Soil Behavior Under Load
Fundamentals of soil behavior under load; pore pressure during
monotonic loading; Ladd’s "Simple Clay” model; densification
and drained cyclic loading of sand; undrained cycle loading of soil.
(Prerequisite: CE 326.) (3 + 0) Offered As Demand Warrants
CE 630 3 Credits
Advanced Structural Mechanics
Shear and torsion, nonsymmetrical bending, shear center, curved
beams, introduction to composite material mechanics, application in
bridge engineering. (Prerequisites: MATH 302, ES 331. Recommended:
Graduate standing in engineering.) (3 + 0) Offered As Demand
Warrants
CE 631 3 Credits
Advanced Structural Analysis
Derivation of the basic equations governing linear structural systems.
Application of stiffness and flexibility methods to trusses and frames.
Solution techniques utilizing digital computers. Introduction to structural
dynamics. (3 + 0) Offered Alternate Spring
CE 637 3 Credits
Earthquake Engineering II
Fundamentals of structural earthquake engineering: strong ground
motion phenomena; dynamic analysis of structural systems for seismic
motion; response spectrum and time history methods, design of structural
systems for lateral forces; shearwalls and diaphragms; moment-resistive
frames, braced frames; current design criteria and design practice;
connection details, serviceability requirement; story drift, non-structural
building elements; soil-structure interaction. (Prerequisite: CE 432.)
(3 + 0) Offered As Demand Warrants
CE 640 3 Credits
Prestressed Concrete
Theory and practice of prestressed concrete design. Pretensioning,
posttensioning. Anchorage of steel. Materials, design specification.
Application in bridges, tanks and slabs.. (Prerequisite: CE 431 and
433. Recommended: graduate standing.) (3 + 0) Offered As
Demand Warrants
CE 661 3 Credits
Advanced Water Resources Engineering
Engineering hydraulics and hydrology with emphasis on statewide
topics, computer modeling for runoff and groundwater studies, reservoir
mechanics, fish hatchery design and hydropower generation. (Prerequisite:
Permission of instructor.) (3 + 0) Offered Alternate Spring
CE 662 3 Credits
Open Channel and River Engineering
Principles of open channel flow, transitions and controls, unsteady
flow, river engineering, stream channel mechanics and mechanics of
sedimentation. (Prerequisite: ES 341.) (3 + 0) Offered Alternate
Spring
CE 663 3 Credits
Groundwater Dynamics
Fundamentals of geohydrology, hydraulics of flow through porous
media, well hydraulics, groundwater pollution and groundwater resources
development. (Prerequisite: ES 341.) (3 + 0) Offered Alternate
Fall
CE 676 3 Credits
Coastal Engineering
Review of deep and shallow water waves, littoral drift, coastal
structures, pollution problems and harbor seiches. (Prerequisite: ES
341.) (3 + 0) Offered As Demand Warrants
CE 681 3 Credits
Frozen Ground Engineering
Nature of frozen ground, thermal properties of frozen soils, classification,
physical and mechanical properties of frozen soils, subsurface investigation
of frozen ground, thaw settlement and thaw consolidation, slope stability
and principles of foundation design in frozen ground. (Prerequisite:
Training or experience in soil mechanics. Next offered: 2005-06.) (3 + 0)
Offered Alternate Fall
CE 682 3 Credits
Ice Engineering
In this course the factors governing design of marine structures,
which must contend with the presence of ice are discussed. Topics include
ice growth, ice structure, mechanical properties and their dependence
on temperature and structure, creep and fracture, mechanics of ice
sheets, forces on structures, and experimental methods. (Prerequisites:
ES 331, MATH 202X, training or experience in soil mechanics.) (3 + 0)
Offered Alternate Spring
CE 683 3 Credits
Arctic Hydrology and Hydraulic Engineering
The course is designed to present materials on aspects of hydrology
and hydraulics unique to engineering problems of the north. Although
the emphasis will be on Alaskan conditions, information from Canada
and other circumpolar countries will be included in the course. (Prerequisite:
CE 344 or equivalent.) (3 + 0) Offered Alternate Fall
CE 684 3 Credits
Arctic Utility Distribution
Practices and considerations of utility distribution in Arctic
regions. Emphasis on proper design to include freeze protection, materials,
energy conservation and system selection. (Prerequisite: ES 341 or
permission of instructor.) (3 + 0) Offered Alternate Fall
CE 685 3 Credits
Topics in Frozen Ground Engineering
Selected frozen ground foundation engineering problems will be
explored in depth including refrigerated foundations and pile foundations.
(Prerequisite: CE 681.) (3 + 0) Offered As Demand Warrants